Chinese English
Home About us Honor Products Feedback Contact us
 
 
Changeover Switch
Mini Circuit Breaker
Residual Current Circuˇ­
Intelligent Low-voltagˇ­
Automatic Voltage Stabˇ­
Thermostat Series
Products Location: Home > Products > SGID Series Residual Current Circuit Breaker
Application
ˇˇˇˇSGID residual current operated circuit breaker without integral over current protection
is suitable for circuit of AC 50/60Hz,rated voltage 230V(2-pole),and 400V(4-pole),rated
current 100A,when a person touches the electricity or the leakage of power grid current
exceeds specified value,it can cut off the fault current rapidly in a ulrta-short time for
protecting the person and power device,besides,it also can be used for infrequent switching
of circuit and infrequent starting of motor,This circuit breaker is applicabe for kinks of
locations such as industery,commerce,tall building,civil residence and so on,Conform
to standard IEC61008-1 and GB16916.1
Specifcations
Normal Operation and Mounting Requirement
1.Circumstance temperature-5ˇć-+40ˇć,average temperature not exceeding 35ˇć.
2.Altitude above sea level less than 2000m.
3.Humidity not exceeding 50% at 40ˇćan not exceeding 90% at 25ˇć.
4.Installation class ll orlll.
5.Pollution class ll.
6.Installation method DIN Rail mounting type.
7.The external magnetism shall not be more than 5 timesof terrestrial one.
8.Product shall be installed vertically at the place where there shall be no severe impact and vibration.
9.Switched on when the handle is at upper position.
Operation Principle Overall and Mounting Dimensions(unit:mm)
>>·µ»Ř    
CopyRight © Jiangxi Sunhong Electric Co.,Ltd.    TEL:86-577-27862813  FAX:86-577-27862000